Custom DTF Transfers for T-Shirts & Apparel – Free Shipping

Why Choose Custom DTF Transfers?

• Vibrant Color Reproduction: Full-color CMYK+White printing captures gradients, photographic details, and spot colors with no screen fees.
• Soft Hand-Feel: Ultra-thin adhesive layer maintains fabric softness—no stiff “plasticky” finish.
• Broad Compatibility: Apply to cotton, polyester, blends, leather, nylon, canvas, and specialty synthetics.
• On-Demand Production: No minimum runs—print exactly what you need and ship same or next day.
• Free Shipping: Standard ground shipping on all orders over $99 (contiguous U.S.).

Key Components Explained

What Is a Full Set?

A Full Set provides a turnkey DTF workflow, including:

1. DTF Printer Unit: Ink system (CMYK + White), print heads, motion assembly.
2. Head Shaker-Dryer: Agitates wet film and partially cures adhesive to prevent smearing.
3. Conveyor Dryer/Curing Oven: Fully melts powder and cures ink for wash-fast adhesion.
4. RIP Software Suite: Color management, white underbase setup, nesting, and job control.

What Is a Head Printer?

• Print Heads: Precision micro-droplet heads (Epson/Ricoh/Kyocera) for sharp detail.
• Ink Delivery System: Reservoirs, tubing, and maintenance carts ensure consistent flow and automatic cleaning cycles.
• Motion & Control: High-precision rails and stepper motors maintain alignment and repeatability.

What Is a Head Shaker-Dryer?

• Shaking: Distributes and removes excess hot-melt adhesive powder on wet prints.
• Drying: Applies gentle heat/airflow to stabilize the film before final curing.

5-Head DTF Printers

For high-volume operations, explore our 5 HEAD DTF Printers:

• Throughput: Up to 50 m²/hour for large batch orders.
• Color Uniformity: CMYK+White across five heads minimizes banding.
• Redundancy: Heads operate independently—maintenance on one doesn’t halt production.
• Advanced Maintenance: Automated capping and nozzle checks extend head life.

4-Head DTF Printers

For startups and boutique shops, see our 4 HEAD DTF Printers:

• Speed: Up to 35 m²/hour—perfect for moderate runs.
• Footprint: Compact design fits small studios or mobile units.
• Scalability: Optional fifth head can be added as you grow.
• Consumable Savings: Power down unused heads to conserve white ink.

How to Select Your DTF Solution

• Order Volume: Match printer capacity to daily/weekly throughput.
• Substrate Mix: Ensure compatibility with your most-used fabrics.
• Film Width: Choose 24", 32", or 42" rolls based on design dimensions.
• Budget & ROI: Compare Full Set vs. standalone for total cost of ownership.
• Space & Ventilation: Plan layout for printer, shaker-dryer, and oven.
• Support & Warranty: Prioritize vendors with rapid service and training.

Best Practices for Durable Transfers

• Proper Curing: 140–160 °C for 60–90 s in a conveyor dryer.
• Heat Press Settings: Pre-press garments, then 140–160 °C for 10–15 s.
• Peel Method: Hot peel immediately or cold peel after cooling, per powder specs.
• Wash Instructions: Machine wash inside-out ≤40 °C, gentle cycle; tumble dry low or hang dry.
• Storage: Store transfers flat, in cool/dry conditions to avoid moisture and distortion.